Review of OXVA Unibox PnM Kit

The fact that in the past few years, many manufacturers have focused their attention and reoriented production on POD-systems and sub-mods, not surprisingly, because it is this segment of the market today is developing very rapidly. But this does not mean that all vapers have abandoned their traditional box-mods and tanks, on the contrary, many lovers of delicious and flavorful vapor are looking for new variants of classic devices. Especially for such vapers dynamic company OXVA together with VAPX have developed Unibox PnM Kit starter kit, which, frankly, is somewhat different from the devices presented by competitors. It’s worth giving credit to such a collaboration, as the result is very worthy.

General information

OXVA Unibox PnM Kit is a starter kit that consists of a Unibox mod box mod, equipped with a productive and functional chip, and a Unione PnM tank atomizer, designed to use Uniplus vaporizers. The box mod looks quite traditional, it is small in size, with one rounded side and a flat control panel. One of the features of the device body has IP68 protection, so it is not afraid of water, dust and falls. The proprietary chipset has performance, functionality, and it has the ability to be configured with a PC. The Unione PnM tank is designed for installation of Uniplus series vaporizers, thanks to which the vaper is guaranteed to get a great taste and bulk. You can buy OXVA Unibox PnM Kit in five colors – Silver Blue, Black, Gold Blue, Gunmetal, Gold Purple.

Kit

The manufacturer has decided to complete the starter kit quite standard, without any extravagances, but at the same time in the box the vaper will find everything that is necessary for the trouble-free use of the device. In the box the vaper will find:

Unibox Mod;

Unione PnM tank atomizer;

0.15ohm Uniplus coil vaporizer (pre-installed);

0.3ohm Uniplus coil vaporizer;

USB Type-C cable;

Bubbleglass;

Replacement Eringes;

User’s Manual.

Unibox Mod Box Mod

The company OXVA is already familiar to vapers, as it was not only created by Justin Lai, who is known for the fact that he was involved in the development of devices at GeekVape Zeus and Aegis. A company VAPX just beginning to gain momentum she has already presented several interesting devices. The result of their joint work OXVA “amp;VAPX Unibox PnM Kit, which can surely prophesy a good future, as the device turned out quite interesting, practical and original.

Box-mod OXVA “amp; VAPX Unibox Mod is made in a rather traditional for single banach style neat device in which one side is semicircular, and the second side with a flat control panel, so the device has excellent ergonomics and sits well in your hand. The device is not the smallest 89*39*29, and not the lightest 144 grams, but the weight is fully justified by the fact that the body is made of zinc alloy. The mounting area is designed for installation of tanks and droppers up to 28 mm in diameter.

An important feature of OXVA “amp;VAPX Unibox Mod is that it has protection standard IP68, so it is not afraid of moisture, dust and bumps (a hammer is still not worth hitting it).

The maximum power of 80 watts is provided by a traditional 18650 battery, which is installed from below under the screw cap with a handy key. If you need to charge the battery, you can use the USB Type-C connector located on the bottom end near the battery compartment and protected by a silicone plug, a current of 2A.

OXVA “amp;VAPX Unibox Mod runs on a proprietary chipset, thanks to which the vaper will get great functionality, as it will have a lot of modes VW, TC (NI200, SS, TI), VPC, VV. The minimum resistance supported by the chip is 0.08 ohms. A nice bonus is that when you connect the device to a PC and install the special software, the vaper will be able to fine-tune the device and update its firmware.

The device is equipped with a 0.96 inch color display where the vaper can find a standard set of information about the work of the box mod.

Unione PnM tank atomizer

The Unione PnM tank atomizer was released by OXVA somewhat earlier, but it was in this starter kit that it found its place. It is a standard unserviced sub-tank format that is easy to use and maintain. The seating diameter is 24.5mm, so it can be confidently used on any box mod, not just the OXVA “amp;VAPX Unibox Mod. The tank uses a 510 drip-tip, which can always be replaced if you want.

The tank is made in a sub-tank format metal base and removable cartridge, in which the vaporizer is installed. The manufacturer still offers two vaporizer options on the 0.15ohm Uniplus coil and 0.3ohm Uniplus coil mesh, so there is no problem with flavor and bulk.

Adjustment of blowing is realized by turning the massive ring at the base of the tank, and it is worth remembering that this atomizer is designed for free hookah puffing.

To fill the tank you need to remove it from the base, turn it upside down, open the silicone cap on the bottom end and pour 4 or 5 ml of liquid, depending on what kind of glass is installed.

Conclusions and impressions

To be honest, it has been quite a long time since a device with such characteristics as OXVA “amp;VAPX Unibox PnM Kit, which can confidently compete with the expensive devices on the Evolv chip, appeared on the vape market. A vaper who buys OXVA “amp;VAPX Unibox PnM Kit gets a versatile, functional, practical and convenient starter kit that will become indispensable every day.

Advantages and disadvantages

Disadvantages

To refill it is necessary to remove the cartridge from the base;

Tightness does not quite meet the specified standard.

Advantages

Compact size;

Ergonomic enclosure;

IP68 protection class;

Rechargeable battery 18650;

Fast charging;

High-performance chipset;

Excellent functionality;

Supports 0.08 ohms resistance;

510drip-tip;

Mesh vaporizers;

Adjustable blowback;

Large tank volume.