Review of Innokin Go Z starter kit
I’m sure many vapers started vaping with hisses, and then confidently bought the iJust from Eleaf, because it was more powerful, more delicious, and more autonomous. Many years have passed since the release of the first iJust, but the tube form factor has not escaped the attention of vapers such devices are in demand even now. And the most interesting thing is that they almost have not undergone any dramatic changes, because of the simplicity of design, reliability and lack of need to buy additional charger and batteries, they are in demand by vapers. There are a lot of devices in this format on the vape market, but this does not mean that manufacturers have stopped producing them. An example of this company Innokin, not once released a tube, presented a small, but quite interesting device Go Z starter kit.
General Info
The Innokin Go Z starter kit is a compact vaporizer with a medium capacity battery that operates at a constant power of 13 Watts and is designed for the use of Z-series vaporizers. The device looks quite simple and without any frills, but you can hardly expect anything special and non-standard from the starter kit – a small cylinder with the same small cartridge tank. The device has a good autonomy due to a fairly powerful battery. The device is designed to use Z series vaporizers with 1.6 Ohm resistance, so you can confidently vaporize freebase or salt nicotine based liquids. The “Innokin Go Z starter kit” is available in five colors black, gun metal, silver, blue and pink.
Kit
The device can be attributed to the middle class, so it is equipped quite standard. So in the box the vaper will find:
GO Z Pen Device battery pack;
GO Z Tank Atomizer;
Z Coil 6 ohm vaporizer (pre-installed);
Micro-USB cable;
User’s Manual.
GO Z Pen Device Battery Pack
The Innokin Company has released the tube mod format devices more than once, and they have become quite popular among vapers who prefer such devices. Not so long ago, the company presented the Innokin Go S pipe mod, to which vapers had certain remarks related to the practicality and usability of such a set. Deciding to quickly correct these deficiencies, the developers began dopilivat earlier released device, the result was the Innokin Go Z starter kit.
You shouldn’t demand any original design or additional decor from the starter kit because it’s actually a small sized pipe with a connector pad and a fire button. Innokin Go Z starter kit” is small enough 129*20 mm, so the battery pack can be used with other atomizers of corresponding diameter with 510 connector. The colors in which this device is offered are quite calm and unobtrusive, so the vaper will be able to choose the best design option for himself.
Innokin Go Z starter kit” is designed to work at a constant power of 13 watts, which is provided by a built-in 1500 mAh battery, allowing to get autonomous operation of the device within two or three days, as the recommended resistance of the installed vaporizer is 1.6 Ohm. The battery is charged using the micro-USB connector located on the side of the device with 0.8A current.
The device is simple enough, but at the same time it is equipped with a simple board that allows you to provide a full set of protections. Chipset allows you to work with resistance vaporizers and spirals from 0.6 ohms, and it automatically adjusts the output power. Around the single fire button is a LED ring that changes its color depending on the battery level.
GO Z Tank atomizer
We can’t say that GO Z Tank atomizer is not unusual or particularly original tank, it’s quite an ordinary tank, made rather neat and stylish. The diameter of the tank is 20 mm, so you can use it with other small box mods if you want.
Despite the fact that GO Z Pen Device (according to the manufacturer) supports work with resistance from 0,6 ohm, it is recommended to use Z Coil 1.6 ohm vaporizers, designed for vaping with both freebase nicotine and salt nicotine liquids.
The advantage of such a tank can be considered the possibility to adjust the airflow, implemented in a standard format. To adjust it you just need to turn the ring in the base of the tank.
In order to fill the tank, you need to slide the top cap in a straight line and pour 2 ml of liquid into the tank.
Impression Conclusion
It can honestly be said that Innokin Go Z starter kit” is a typical pipe-mod that does not have wide range of functions, but it will suit perfectly as a device for every day fans of tight cigarette puffs. The device is characterized by ease of use and maintenance, a tight puff and a good autonomy.
Advantages and disadvantages
Disadvantages
Weak charging current;
Small tank volume.
Advantages
Compact size;
510 connector;
High capacity battery;
Reliable chipset;
Easy operation;
Easy refilling;
Adjustable airflow.
