Review of Innokin Adept Starter Kit

If you look at the statistics of vape devices sales, not all vapers are happy to use powerful box mods and drip sticks. The number of users who prefer vaping on small box-mods and tanks for tight cigarette puffs is not as small as you might think. It is for them that manufacturers with enviable regularity release compact devices with atomizers for tight cigarette puffs. Innokin not too long ago released a new Adept Starter Kit, which is designed for cigarette enthusiasts. The kit is quite interesting in addition to being very compact and equipped with a maintenance-free tank, it is made in a dust / moisture / shockproof case, so it can be safely taken with outdoor enthusiasts. It is hard to say how much of a full-fledged cigarette maker this kit is, but we can definitely say that the device is a bit unconventional and original.

General Info

Innokin Adept Starter Kit starter kit consists of box mod with built-in battery and made in a protected enclosure, and atomizer, working on a removable vaporizer, designed for a tight cigarette puff. The box mod is made in a rather original design, which not only attracts attention, but also sits perfectly in the hand due to its small size. The device works with built-in battery, and it is equipped with a simple board with a choice of working power of the device within the range of 11-17 Watts. The ZLIDE Tank atomizer works on interchangeable vaporizers, and it is compatible with the vaporizers for Zenith tanks of the same manufacturer. The tank is designed for a tight cigarette draw, easy to maintain and use. You can buy Innokin Adept Starter Kit in six colors black, white, purple, Sky, Ocean and Forest Camo.

Kit

The manufacturer has done everything for the new starter kit to be decently packaged, and the vaper did not have to search urgently for consumables for it. That’s why in the box the vaper will find:

ADEPT Smart MTL Box Mod;

ZLIDE Tank atomizer;

Zenith Z-PLEX3D 0.48ohm Atomizer Head (pre-installed)

Zenith 1.6ohm Atomizer Head;

Replacement Glass;

Replacement O-rings;

Extra 510th drip-tip;

USB charging cable;

User’s Manual.

ADEPT Smart MTL Box Mod

In the range of many manufacturers in recent years you can find devices that are made in protective cases, allowing no fear of moisture, dust and falls. So Innokin’s decision to release its own version of an unbreakable box mod is quite logical to be in the trend. ADEPT Smart MTL Box Mod has IP67 protection standard, so it is protected from moisture, dust and bumps (no need to use a hammer to check it).

Form-factor, in which ADEPT Smart MTL Box Mod is made, is quite traditional rectangular, with rounded edges, so the device has excellent ergonomics. Due to the fact that the body has recesses and convexities, it sits perfectly in your hand and does not slip out, even if you take it with wet hands. It is worth to say that the connector area of the device is big enough to install tanks and drips up to 28 mm in diameter, but it should be taken into account that the power of the device is small, so not all atomizers will fit.

The box mod is powered by a built-in battery of 3000 mAh, which in combination with a small power will allow the vaper to get a very good autonomy. The battery is charged via a standard micro-USB connector, located on the bottom end of the device and covered with a special silicone cap, 2A current, so the charging time is minimal.

An important feature of ADEPT Smart MTL Box Mod is that the vaper has the ability to set the power device within the range of 11-17 watts. To do this on the side panel there is a button and indicators, and they are located quite originally five indicators, four of which show the power and the fifth power output limits – 11-14 and 14-17 watts. The vaper will not be confused by the indicators, as there is a hint on the bottom end regarding the indication.

ZLIDE Tank Atomizer

The ZLIDE Tank atomizer is not just an unserviced atomizer, but it is quite an interesting tank that many vapers will like. The tank has a diameter of 22.7 mm, so it can be used on many other devices as well.

The tank uses Zenith series vaporizers, which is already known to many vapers. Depending on the vaper’s preference, you can install the Zenith Z-PLEX3D 0.48ohm Atomizer Head or the Zenith 1.6ohm Atomizer Head, but the vaper will get a very decent flavor delivery.

ZLIDE Tank is a tank for a tight cigarette puff, so at its base there are four small holes, overlapping which with the ring adjuster, you can set the best option depending on the preference of the vaper. Separate attention should be paid to the filling process of the tank. It is equipped with child protection, implemented by a removable 510-meter drip tip. In order to pour 2 ml of liquid, you need to take out the drip-tip, and then slide the top cap in a straight line, opening a medium-sized hole.

Conclusions and impressions

Innokin Adept Starter Kit refers to a rather interesting and non-standard class of devices that combines a cigarette tank and an unbreakable box mod. Many vapers, especially those who like active pastime, will appreciate the protection of the box mod, the ability to choose the power and decent tank on interchangeable vaporizers for cigarette puffs.

Advantages and disadvantages

Disadvantages

Low power;

The indication takes some getting used to.

Advantages

The original design;

High indicators of autonomy;

Protection class IP67;

Fast charging;

Adjusting the power;

Large landing pad for atomizers;

Compatibility of the tank with vaporizers from Zenith RTA;

Childproof;

Tight adjustable puff;

Excellent flavor transfer.