Review of GeekVape Z RDA - Vaping in New Zealand

For quite a long time there was a dispute between vapers as to what tastes better than a tank or a drip. Time has passed, but the relevance of the dispute has not faded, however, now vape manufacturers release new atomizers not as often as it was two or three years ago. Naturally, the number of vapers using vape machines has significantly decreased, but those who prefer a really rich taste are ready to regularly pump RDAs while releasing clouds of delicious and flavorful vapor. The company GeekVape decided to please the drip lovers, and presented Z RDA (for those who missed it, it makes sense to remind that Z is renamed Zeus). This drip is a worthy successor of one of the most popular in the last two years tank Zeus X.

General Info

The GeekVape Z RDA is a medium sized, two P-pillar atomizer for dual or single spirals, with a bottom-side blow-through designed for maximum flavor and full-bodied vibe. The drip looks quite unusual: it is a tapered cylinder with a top cap that is used for both air intake and blowing control. e-cigarettes online boutique in new zealand For the installation of spirals there are two U-shaped racks, which are very convenient to use. The drip has a rather interesting blowing system with the top air intake and the subsequent direction of air flow under the spirals and on their sides. You can buy GeekVape Z RDA in six colors black, steel, gunmetal, gold, blue and rainbow.

Complete set

If a vaper has ever come across a Zeus X tank, he knows for sure that GeekVape always packs its devices very well, and the new vape is no exception. In the box the vaper will find:

Z RDA Drip Atomizer;

Replacement Drip-Tip;

T-shaped screwdriver;

Jig coil for coiling spirals;

Replacement screws;

Replacement O-rings;

Four strips of absorbent cotton;

Four prewound Alien Clapton Coil4 Ohm coils;

User’s Manual.

Appearance and Design

The GeekVape Company rightfully occupies one of the leading positions in the vape market, as almost every one of their devices (there were pairs of devices that were not particularly liked by vapers) becomes a hit of sales. Vapers who are interested in the world of vaping know that the company GeekVape has a separate division Digiflavor, which is engaged in the production of drip, so the presentation GeekVape Z RDA was a bit of a surprise to many vapers, but the fact remains that the new dripper has already been officially presented.

Naturally, for vapers who are used to seeing the characteristic logo in the form of the head of Zeus only on the tanks, it is a little unusual to see it on the dome of the drip. The GeekVape Z RDA drip looks quite original, not the usual cylinder with a top cap, but a rather complex design that immediately attracts attention. The base diameter of the drip is 25 mm, and it tapers towards the top, and this is not just for beauty, but due to the design features.

If we talk about the design features of GeekVape Z RDA, the side skirt is held on the deck by keys, and in its upper part there is a place for landing a top cap, equipped with an oring. Inside the skirt there are two channels that allow you to direct air flow directly to the spirals at the bottom and side. The top cap is installed on the top of the skirt and the drip-type is installed into it.

The drip-tip is 810th, no-ring, and there are two drip-tips in the set – one standard and the other with a low profile.

Base, blowing and usage features

Taking into account the fact that GeekVape Z RDA can be called the successor of Zeus X, it uses the same base, familiar to many fans of this legendary tank. Two medium-sized racks, made in the shape of the letter U, are characterized by convenience and proven over the years (you can already say so) by the design.

The installation of the coil or coils is very simple, you need to insert the legs of the coil in large enough holes, and the excess can be cut immediately after installation, as there is space under the drains.

Laying of the absorbent cotton will not cause questions, as there is not enough space. The main condition for not starving is that the length of the wool should be sufficient, and it should be placed in the tub.

It is hard to call a tub deep, but taking into account its design you can fill it up to 2 ml of liquid (almost up to spirals). If you wish you can install squonk pin which is sold separately and use the drip on appropriate devices.

Separate attention deserves blowing in GeekVape Z RDA. The air intake is made from the top, and then it flows through the channels inside the skirt under the spirals and on their side surface, so the flavor transfer and the boost will be on top. The airflow adjustment is done with the top cap, which has quite large notches on it for convenience.

Conclusions and impressions

Frankly speaking, the appearance of the Z RDA drip from GeekVape is a rather unexpected event, but a pleasant one, as many people now want to get a very interesting drip from this manufacturer. The vaper, who will decide to buy GeekVape Z RDA, will get a full-fledged non-pour, with an easy and convenient installation of spirals, properly located blow-through and with excellent flavor transfer.

Advantages and Disadvantages

Disadvantages

Squonk pin must be bought separately;

Oring under the top cap will wear out very quickly.

Advantages

The original design;

Great choice of colors;

Good equipment;

810th drip-tip;

No spill;

Easy installation of the coil and absorbent cotton;

Bottom-side blow-by;