Review of GeekVape Z100C DNA Pod Mod
After vaping began to evolve rapidly, many manufacturers have not only come up with simple control chips that allow you to control power, coil temperature and voltage, but also more serious boards, through which the vaper can get a lot of positive moments. Such boards can safely include chipsets from the American company Evolv, which are known to all vapers under the name DNA. It is these chipsets are considered the best because of their stable operation, performance, functionality. The company GeekVape a long time used in their devices branded chips, but, deciding to please fans of more expensive options who want to get the most out of their devices, presented Z100C DNA Pod Mod. Quite simply designed sub-mod will please the fact that it is controlled by a real DNA chipset.
General Info
The “GeekVape Z100C DNA Pod Mod” is a rather large sized pod mod for one 21700/18650 battery running on the DNA 100C chipset and supporting P series vaporizers. The design of the pod-mod can’t be called very original or non-standard – it’s a neat device with clear straight lines and beveled edges, so it sits perfectly in your hand. For autonomy is responsible for one removable battery 21700 or 18650, and for performance and functionality chipset DNA 100C, thanks to which the vaper can adjust the device to your exact parameters. The interchangeable P series vaporizers on the grid and adjustable blowing will allow you to get the maximum flavor. You can buy GeekVape Z100C DNA Pod Mod in four colors black-blue, black carbon, blue-green and silver-red.
The bundle is .
What I’ve never had much complaints about GeekVape’s devices (not the POD systems, they’re a separate story) is the packaging, as it always tries to pack its devices very decently. Therefore, in the box the vaper waits:
Z100C DNA Pod Mod battery pack;
The Z100C DNA Pod cartridge;
15 ohm P Series Mesh Coil, 70-85W (pre-installed);
Vaporizer 4 ohm P Series Mesh Coil, 50-60W;
Vaporizer Extractor;
510 connector adapter;
Type-C USB Cable;
Adapter for installing 18650 batteries;
User’s Manual.
Z100C DNA Pod Mod Battery Pack
GeekVape devices are well known to all vapers, as most of them have already become legendary, and it does not particularly matter whether you buy a tank, box mod, drip or POD-system. The company pays special attention to the quality of the products offered and its compliance with the requirements and wishes of buyers. But at no time did the company’s developers resort to third-party chipsets, in particular from Evolv, but used their own developments. Whether to stand out a little, or to try it out, the company presented the GeekVape Z100C DNA Pod Mod, which almost immediately after the official presentation drew the attention of vapers.
The design of the new device is controversial on the one hand nothing that attracts attention, some original solutions or additions, and on the other hand everything is simple, strict and neat. In any case, the design of the pod-mod is dominated by straight lines and beveled corners, so it sits comfortably in your hand. You can not say that GeekVape Z100C DNA Pod Mod” is a compact device as its dimensions are 129.6*39.09*33.09 mm, but considering the battery used 21700 the size is quite logical.
The maximum power of 100 watts is provided by a removable 21700/18650 battery (with the help of an adapter), which is installed from below under the hinged lid with a latch.
In order to charge the battery and synchronize the chipset with your computer, there is a USB Type-C connector under the control buttons (charging current 3A).
Naturally, the main feature of the GeekVare Z100C DNA Pod Mod is the use of the DNA 100C chipset. The chipset needs no special introduction, so the fact that the vaper will get great functionality Watts/Watt Boost /Kanthal/Replay/SS 430/SS 316/Titanium/Nickel 200 is quite logical and justified. If necessary, the chipset firmware can be updated using a special program in which you can also use the fine-tuning of the device.
The pod-mod is equipped with a 0.96 inch color display, on which the vaper will find maximum information about the operation of the device. There are three keys under the screen for control, they are traditional for all devices with DNA chip.
Z100C DNA Pod
Against the background of the chipset used cartridge Z100C DNA Pod is a bit lost, but it is made in the best traditions of GeekVape company, it is practical, convenient and functional. The manufacturer provided the possibility to use the device as a box mod from the very beginning, so the kit already has a 510 connector adapter that can be installed instead of the cartridge. The drip tip is removable, 810th.
The Z100C DNA Pod cartridge is designed to fit P-series vaporizers (they have been used by the company in other devices more than once). There are two vaporizers in the kit with 0.15 and 0.4 ohm resistance, both on the grid, so the flavor transfer will be at the highest level.
The developers have provided blowing adjustment, implemented by rotating ring, which is located under the drip-type. The cartridge is easy to refill and practicality on its side surface you just open the silicone cap and fill the hole with 5 ml of liquid.
Conclusions and impressions
The “GeekVape Z100C DNA Pod Mod” is the choice of vapers who want a modern sub-mod and the functionality of a DNA chip at the same time and are willing to pay 2-3 times the price because they know WHAT they are paying for. The device features practicality, autonomy, availability of a large number of functions and reliability.
Advantages and disadvantages
Disadvantages
Relatively high cost;
For MTL tightening the device is not suitable.
Advantages
Ergonomic housing;
Strict design;
Rich equipment;
Battery 21700/18650;
Fast charging;
High-performance chipset;
Excellent functionality;
Use of P-series vaporizers;
Adjustable blow-through;
Convenient refilling;
Good taste and flavor.
