Review of Ehpro Billow v2

Today’s guest from the company Ehpro” needs no introduction, because at the moment it is one of the most popular, inexpensive, and most importantly tasty tanks in the world. I present to your attention Billow v2.

Unpacking

Ehpro Billow v2

We open the box and we are greeted by the tank and all the extras that are provided with it. I should note that the kit is very rich: good quality japonovate, screwdriver, a huge number of orings and bolts. What is missing here is an additional glass and this is probably a minus. The plus is that the tank is so popular that almost always without problems you can buy a new glass on it if you break your own, they are available in almost every store and are inexpensive. new zealand vape shop christchurch We have a big version of the tank with 6.5 ml, there is also a Nano version with 3.2 ml and the so-called Nano Kit, which includes a new shaft and a smaller glass, there are no other differences in them. On the back is a code to check the originality, the downside is that it is not a scratch code, as everyone is used to, it is simply printed.

Appearance

The tank is available in two versions – black and steel and both will look adequate on most devices. The tank looks just fine, even though it has been nicknamed the fatty tank, because its diameter increases towards the middle and then narrows again. At the base of the tank diameter is 22 mm, the glass to the center increases to 23 mm, but this is not a problem, in size it will fit almost any mechmods and even more so boxmods. The top and bottom parts have knurls for more convenient unscrewing of the tank. Here are some examples of how the device looks on some devices:

In the disassembly of the tank consists of 6 parts: base with blowing, evaporation chamber body, shaft, glass, topkep and driptip (since the tank has a bottom filling, it makes no sense to disassemble it in more detail than in the photo below, unless you break the glass, so I did not =))).

Ehpro Billow v2.

Disassembling and cleaning it is very easy and convenient, all parts are easy to unscrew while maintaining perfect balance, in working condition you won’t have any problems with something unscrewing on its own. When using the tank I noticed the only disadvantage, the ring of blowing adjustment, if the ring gets liquid, will be very free to move as he wants, but this problem does not appear in everyone and solve it is very simple by washing or wiping the ring orings under the ring.

Base

Ehpro Billow v2

The base in the tank is excellent, but it will be very difficult for beginners to work with it, so, perhaps, this device is for those who have at least some experience in winding. There are three racks, the central one is twin. The holes for coil tails are small and will not be suitable for fat windings, the tank is designed for microcoils/parallels/braids. I managed to shove into it micro fusion klepton 0.1 mm NiCr80 over two 0.3 mm FeCr and was satisfied, but not everyone can wind it, and who already knows how – and without me know everything. Ideally, you should wind 2 mm windings, but if you are very careful and do not overdo it, 2.4-2.5 mm will fit there perfectly. It is impossible to use the tank on one coil due to its design, although I’ve heard legends about homemade plugs on one of the sides, but if it’s true, I don’t understand why. The cotton is placed in the grooves, and then the dome is screwed on” (be careful that the coil does not touch the dome, or you will have a short circuit. And if you catch a fat, yearly short circuit on the mechmode, nothing good will happen, unfortunately), all this is then assembled, and you are ready to vaporize. Tasty vapor tank gives just an immeasurable amount; I think this is a well-known fact.

Let’s summarize

Great tank, I would even say that it is one of the top 5 best flavor tanks of 2015, of course you can pile it up too, but why? Great design, blowing is adjustable from free to cigarette draught, very convenient to disassemble in order to wash. Minus is only that vapers-beginners will be very difficult to coil it due to the fact that ” the base is not very comfortable and small from unaccustomed, but it is worth it.

You can buy Billow v2 in our store.

Specifications:

Type serviced sub-ohm tank;

Stainless steel body with matte finish;

Airflow adjustment with a ring around 2 7x2mm holes;

Wide duct openings;

Adjustable copper 510 connector;

Pyrex glass tank;

Liquid capacity 6.5 ml;

22mm diameter. The glass in the center reaches a diameter of 23 mm.