Review of Oxva Xlim SE POD kit
Kits,  Pods

Review of Oxva Xlim SE POD kit

The vape market is constantly evolving, and according to its own laws, which are not easy to figure out. After its introduction many vapers switched to massive massive powerful box mods and 0,05-0,07 ohm vaporizers that made it possible to get a lot of vapor. But after a while, compact and self-contained PODs and submods became the most popular and in demand. The Chinese company OXVA, founded fairly recently, has not once pleasantly surprised vapers not only with their atomizers, but also interesting POD-systems. Not so long ago the company presented POD-system Xlim, which provides power regulation; so many vapers were able to appreciate its advantages. Deciding to make a similar device, but in a simpler version, the company released Oxva Xlim SE POD kit, which is sure to find its fans.

General Information

Oxva Xlim SE POD kit is a compact POD system with a medium capacity battery, designed to use interchangeable cartridges with built-in vaporizers and is compatible with the cartridges of the last release. The device is made in the familiar to vapers form factor of a small stick, which certainly will not have any complaints about ergonomics. The device is very easy to use, activated by puffing, and blowing in it is adjustable. POD system is designed to install cartridges with built-in vaporizers with resistance of 0.6 and 0.8 ohm. If you want you can use cartridges from the Oxva Xlim POD kit version. The Oxva Xlim SE POD kit comes in eight colors: black, dark blue, gray, rose gold, silver-purple, green-gold, rose-gold and blue-purple.

Kit

It is natural to expect something special in the package from a fairly simple POD-system, but in the box the vaper will find everything you need for full use of the device:

Xlim SE Battery pack;

Xlim SE POD 0.6 ohm cartridge (pre-installed);

Silicon plug;

User’s Manual.

Xlim SE Battery Pack

Surely many vapers know that the company OXVA was founded by Justin Lai, who was engaged in the development of well-known devices in the company GeekVape Zeus and Aegis. Within short period of time the company has managed to make a name for itself, it released not only several interesting tanks (by the way, they can surely compete with not unknown Zeus X), but also very interesting universal sub-mods. Not so long ago the company started to release other POD-systems which became a hit of sales almost at once. Deciding not to stop there, the developers presented Oxva Xlim SE POD kit, which will pleasantly surprise vapers with its practicality.

The design of Oxva Xlim SE POD kit is very similar to the previous version – it is a traditional stick, deprived of the special decorations and ornaments, a little austere, but interesting because it has no sharp edges, making it ergonomic. The device is relatively small, 111*24*14 mm, and thanks to the use of aluminum alloy housing, it weighs only 46 grams. It is nice that the manufacturer offers eight colors of the device, so the vaper has a choice.

The maximum power of 25 watts is provided by the built-in battery of 900 mAh, with which you can get autonomous operation of the device for two or three days. The battery is charged using a USB Type-C connector located on the bottom end of the device, 1A current (no charging cable included).

The manufacturer states that the power Oxva Xlim SE POD kit is 5-25 watts, and it is set automatically depending on the resistance of the installed cartridge. In order to be able to monitor the battery level, there is a LED indicator on the side panel in the form of a letter X.

Xlim V2 POD cartridge

The Oxva Xlim SE POD kit was originally designed as a compact POD system, so it makes sense that it uses cartridges with built-in vaporizers. Besides the fact that there are two such cartridges, you can also install cartridges from Oxva Xlim POD kit version – they have the same size and pin layout. The cartridge is held in the battery pack by magnets.

For this device and its predecessor, the Oxva Xlim POD kit, new Xlim V2 cartridges were developed with built-in vaporizers that come in two resistance variants 0,6 and 0,8 ohm. Both are on mesh, so you won’t have any flavor issues.

This POD system has airflow control, which is implemented with a small slider on the side of the battery box. The vaper has three options for air intake, so he can choose the best variant of puffing for him.

The cartridge is easy to refill by taking it out of the battery box, opening the small cap on the side and pouring 2 ml of liquid in.

Conclusion and impressions

Oxva Xlim SE POD kit is an interesting and practical variant of POD system that is perfect for everyday smoking liquids with salts as well as freebase nicotine (preferably using 50/50 ratio of liquids). The device is small, self-contained and versatile, so vapers will not have any particular complaints about it.

Advantages and disadvantages

Disadvantages

Weak charging current;

To refill the cartridge it is necessary to remove it from the battery pack.

Advantages

Compact size;

Low weight;

Great choice of colors;

High capacity battery;

Activation when you draw;

Automatic power selection;

Supports cartridges from the previous version;

Built-in vaporizers on the grid;

Blow control.