Lost Vape Ursa Nano Pro Pod Kit

POD-systems over the past few years have not only become popular and in demand, but also steadily replace traditional box mods and tanks. There are several reasons for such popularity – it’s compact size, ease of use and maintenance, good taste, and the ability to safely vaporize liquids based on salt nicotine. Each vaper chooses his own reason for starting to use POD system. Because of the popularity of devices of this format many manufacturers who have always been famous for their classic devices began to produce POD-systems. One of the brightest examples of this is Lost Vape, which presented the Ursa Nano series, which is already in demand among vapers. In order to please vapers even more, the company decided to improve the previously released devices, and launched the Lost Vape Ursa Nano Pro Pod Kit.

General data

Lost Vape Ursa Nano Pro Pod Kit is a compact POD-system, equipped with a powerful built-in battery, running Quest chip and designed to use Ursa Nano series cartridges. The device is made in the most traditional form factor for POD-systems – a small stick with rounded edges, which is easy to fit in your pocket. Thanks to the fact that the device is equipped with the Quest chip well-known to vapers, it can work in vari-watt mode with the power of 9-25 Watts. The device is designed to use cartridges with built-in vaporizers and replaceable UB Mini, Ursa Nano series with the resistance of 0.6 and 0.8 Ohm. Lost Vape Ursa Nano Pro Pod Kit comes in nine colors, among which you can find the classic colors and original gradient.

Equipment

Lost Vape would not be Lost Vape if they did not complete the new POD-system very decently, so in the box the vaper will be able to find:

– Ursa Nano Pro Pod Device battery pack;

– Ursa Empty Cartridge;

– Ursa Cartridge with integrated 0.6ohm vaporizer;

– UB Mini S1 Coil(0.8ohm) vaporizer;

– USB Type-C Cable;

– Replacement Eyring;

– Lanyard;

– Warranty card;

– User manual.

Ursa Nano Pro Pod Device Battery Pack

The Lost Vape Company is well known to all vapers, and not only for its expensive box mods with DNA chip, but also for its many devices that run on the Quest chipset. Devices from this manufacturer are in constant demand among vapers because of their reliability, functionality and build quality. After many manufacturers began to mass produce POD-systems, Lost Vape also established the production of devices of such format – they presented Ursa Nano series. Considering that the devices of this series are very simple, the company decided to improve them a bit, so it released Lost Vape Ursa Nano Pro Pod Kit.

The fact that Lost Vape Ursa Nano Pro Pod Kit is made in the most traditional format for POD-systems – stick, the decision is absolutely correct and considered, as such form factor is rightly considered the most in demand. The device is small – 94,4*24*14 mm, and lightweight – 49,5 grams, so it will not stir in your pocket. The body is made of aluminum alloy, and it is painted in quite original colors, among which the vaper can find the most suitable for him performance.

The power of this POD system is provided by the built-in battery with 900 mAh capacity, which is enough for one or two days of autonomous work. The battery is charged via USB Type-C connector located on the bottom end of the device with 2A current.

An important feature of the Lost Vape Ursa Nano Pro Pod Kit is that it is run by the Quest chipset, which is already familiar to vapers. The presence of this chip will allow the vaper to get a power of 9-25 watts, which is controlled by a single button “Fire”, located in the center. Activation of the device is done both with the button and with a puff. The device is equipped with a small monochrome display, where you can get a minimum set of information about the device – power, vaporizer resistance, battery level, the number of puffs.

Ursa Nano cartridge

It is necessary to pay tribute to the developers of Lost Vape, who made the new device compatible with the cartridges released earlier for Ursa Nano series, so the vaper will not have any problems with consumables. In the battery pack, the cartridge is held in place by fairly strong magnets.

It is interesting that in Lost Vape Ursa Nano Pro Pod Kit you can use the new cartridge with built-in vaporizer 0,6 ohm, and cartridges designed for installation of UB Mini series replacement vaporizers with 0,8 ohm resistance.

The device provides the puff adjustment, implemented with a small slider on the side of the device. Filling is quite simple – the cartridge is removed from the battery block, the silicone cap on the side surface is opened, and after that you can pour 2.5 ml of liquid into the reservoir.

Conclusions and impressions

If a vaper wants a versatile and practical device for smoking liquids with salt or alkaline nicotine, he should definitely buy Lost Vape Ursa Nano Pro Pod Kit. What can I say – Lost Vape once again proved that they can make a really high quality device not only with great power and chip from Evolv, but also compact and practical POD-systems.

Advantages and Disadvantages

Disadvantages

– You have to remove the cartridge from the battery pack to refill;

– The puff slider will be constantly knocked off when carried in a pocket.

Advantages

– Compact size;

– Low weight;

– Great choice of colors;

– High capacity battery;

– Fast charging;

– High-performance chipset;

– Two puff options;

– Variety of cartridges;

– Tightening adjustment.